CobraCrane is the leading camera crane manufacturer in the US with camera Jibs for cinema cameras and video cameras starting at only $399.99
In the world of Camera Jibs, there are single arm, and dual arm. Dual arms will be able to hold a heavier weight, therefore allowing you to move heavier cameras. The CobraCrane Dual Arm jibs have all the same features as the single arm cranes. They will boom, swing, and tilt your camera. They are simple to set up and easy to transport (especially with the padded carry bags!).
 |
CobraCrane 2 CobraCrane 2 camera jib comes in 5 foot (CC2), 10 foot length (CC2PLUS), a Heavy Duty unit (CC2HD) that can be both a 6 foot and a 10 foot length and an 8 / 12 foot unit. The CobraCrane 2 camera jib systems are compatible with virtually all handheld camcorders, a wide variety of shoulder mount systems, most DSLR applications even those with full Rigs and large sized lenses. CobraCrane 2 camera jibs can handle cameras and rigs up to 12 kilos (25 lbs.). This weight is inclusive of batteries, lights, lenses and any other device mounted to the camcorder. |
 |
The FotoCrane2 Dual arm Lightweight jib was created as a result of customer feedback requesting a dual arm lightweight crane able to support a wide variety of DSLR and modern high performance cameras such as the new 4:3 sytems as well as the exciting BlackMagic Cinema Cameras |
 |
With the ability to boom a camera weighing up to 25lbs, the CobraCrane 2 Plus camera jib can reach up to 12 feet above the ground (on a 5 foot Tripod) and can go as low as ground level, offering incredible performance at a very competitive price. The CobraCrane 2Plus camera jib can be used as both a 10 foot and a 6 foot crane. You can change between the two in less then 10 minutes, so you have the right tool at the job for whatever you application. |
 |
With the ability to boom a camera weighing up to 25lbs, the CobraCrane 2HD camera jib can reach up to 13 feet above the ground (on a 5 foot Tripod) and can go as low as ground level, offering incredible performance at a very competitive price. This crane can be used as either a 10 foot or a 6 foot crane, and since these cranes have variable mounting points, you can adjust how much crane is used to elevate the camera and how much can be used to set the counterweight. Built for modern three chip camcorders weighing up to 25lbs, the CobraCrane 2HD camera jib is a dual bar crane able to provide shots from an ant's point of view all the way up to a Giraffe's. Sweeping vista shots of landscapes, panoramas and sporting events have never been easier, or more dramatic |
 |
Our dual arm CobraCrane UltraLite camera jib arm can reach up to 14 feet above the ground (on a 5 foot Tripod) and can go as low as ground level, offering incredible performance with both static and chain and sprocket controlled manual tilting. It weights about half the weight of most of our competitors cranes, yet offers additional features including manual and static tilt, variable pivot points, 8 and 12 foot lengths and simple release plate for quick release and easy operation.
|